If you have installed MySQL from a package (.deb, .rpm, ...) or already installed it from source, please skip to the next section.
If you use the ./configure
--with-mysql=mysql-directory statement for configuring Bacula, you will need MySQL version 4.1 or later installed in the mysql-directory. If you are using one of the new modes such as ANSI/ISO compatibility, you may experience problems.
If MySQL is installed in the standard system location, you need only enter
--with-mysql since the configure program will search all the standard locations. If you install MySQL in your home directory or some other non-standard directory, you will need to provide the full path to it.
Installing and Configuring MySQL is not difficult but can be confusing the first time. As a consequence, below, we list the steps that we used to install it on our machines. Please note that our configuration leaves MySQL without any user passwords. This may be an undesirable situation if you have other users on your system.
The notes below describe how to build MySQL from the source tar files. If you have a pre-installed MySQL, you can return to complete the installation of Bacula, then come back to Phase II of the MySQL installation. If you wish to install MySQL from rpms, you will probably need to install the following:
mysql-<version>.rpm mysql-server-<version>.rpm mysql-devel-<version>.rpm
If you wish to install them from debs, you will probably need the following:
mysql-server-<version>.deb mysql-client-<version>.deb libmysqlclient15-dev-<version>.deb libmysqlclient15off-<version>.deb
The names of the packages may vary from distribution to distribution. It is important to have the devel or dev package loaded as it contains the libraries and header files necessary to build Bacula. There may be additional packages that are required to install the above, for example, zlib and openssl.
Once these packages are installed, you will be able to build Bacula (using the files installed with the mysql package, then run MySQL using the files installed with mysql-server. If you have installed MySQL by debs or rpms, please skip Phase I below, and return to complete the installation of Bacula, then come back to Phase II of the MySQL installation when indicated to do so.
Beginning with Bacula version 1.31, the thread safe version of the MySQL client library is used, and hence you should add the
--enable-thread-safe-client option to the ./configure as shown below:
tar xvfz mysql-filename
Note, the above command requires GNU tar. If you do not have GNU tar, a command such as:
| tar xvf -
will probably accomplish the same thing.
where you replace mysql-source-directory with the directory name where you put the MySQL source code.
where you replace mysql-directory with the directory name where you want to install mysql. Normally for system wide use this is /usr/local/mysql. In my case, I use ~kern/mysql.
This takes a bit of time.
This will put all the necessary binaries, libraries and support files into the mysql-directory that you specified above.
This will create the necessary MySQL databases for controlling user access. Note, this script can also be found in the bin directory in the installation directory
The MySQL client library mysqlclient requires the gzip compression library libz.a or libz.so. If you are using rpm packages, these libraries are in the libz-devel package. On Debian systems, you will need to load the zlib1g-dev package. If you are not using rpms or debs, you will need to find the appropriate package for your system.
At this point, you should return to completing the installation of Bacula. Later after Bacula is installed, come back to this chapter to complete the installation. Please note, the installation files used in the second phase of the MySQL installation are created during the Bacula Installation.
At this point, you should have built and installed MySQL, or already have a running MySQL, and you should have configured, built and installed Bacula. If not, please complete these items before proceeding.
Please note that the ./configure used to build Bacula will need to include
--with-mysql=mysql-directory, where mysql-directory is the directory name that you specified on the ./configure command for configuring MySQL. This is needed so that Bacula can find the necessary include headers and library files for interfacing to MySQL.
Bacula will install scripts for manipulating the database (create, delete, make tables etc) into the main installation directory. These files will be of the form *_bacula_* (e.g. create_bacula_database). These files are also available in the bacula-src/src/cats directory after running ./configure. If you inspect create_bacula_database, you will see that it calls create_mysql_database. The *_bacula_* files are provided for convenience. It doesn't matter what database you have chosen; create_bacula_database will always create your database.
Now you will create the Bacula MySQL database and the tables that Bacula uses.
--prefix option. This can be important to know if you want to make a special backup of the Bacula database or to check its size.
Each of the three scripts (grant_mysql_privileges, create_mysql_database and make_mysql_tables) allows the addition of a command line argument. This can be useful for specifying the user and or password. For example, you might need to add -u root to the command line to have sufficient privilege to create the Bacula tables.
To take a closer look at the access privileges that you have setup with the above, you can do:
<mysql-directory>/bin/mysql -u root mysql select * from user;
Newer versions of MySQL (e.g. 5.7) do not automatically create a user when granting permissions with the grant_mysql_privileges, and so the script may fail. In that case, you will want to do something similar to the following:
su (enter root password) <mysql-directory>/bin/mysql mysql create user bacula identified by '<password>';
then re-run the script.
After you have done some initial testing with Bacula, you will probably want to re-initialize the catalog database and throw away all the test Jobs that you ran. To do so, you can do the following:
cd <install-directory> ./drop_mysql_tables ./make_mysql_tables
Please note that all information in the database will be lost and you will be starting from scratch. If you have written on any Volumes, you must write an end of file mark on the volume so that Bacula can reuse it. Do so with:
(stop Bacula or unmount the drive) mt -f /dev/nst0 rewind mt -f /dev/nst0 weof
Where you should replace /dev/nst0 with the appropriate tape drive device name for your machine.
After configuring Bacula with
--prefix=mysql-directory where mysql-directory is in my case /home/kern/mysql, you may have to configure the loader so that it can find the MySQL shared libraries. If you have previously followed this procedure and later add the
--enable-thread-safe-client options, you will need to rerun the ldconfig program shown below. If you put MySQL in a standard place such as /usr/lib or /usr/local/lib this will not be necessary, but in my case it is. The description that follows is Linux specific. For other operating systems, please consult your manuals on how to do the same thing:
First edit: /etc/ld.so.conf and add a new line to the end of the file with the name of the mysql-directory. In my case, it is:
/home/kern/mysql/lib/mysql then rebuild the loader's cache with:
/sbin/ldconfig If you upgrade to a new version of MySQL, the shared library names will probably change, and you must re-run the /sbin/ldconfig command so that the runtime loader can find them.
Alternatively, your system my have a loader environment variable that can be set. For example, on a Solaris system where I do not have root permission, I use:
Finally, if you have encryption enabled in MySQL, you may need to add -lssl -lcrypto to the link. In that case, you can either export the appropriate LDFLAGS definition, or alternatively, you can include them directly on the ./configure line as in:
LDFLAGS="-lssl -lcyrpto" \ ./configure \ <your-options>
This will be the same with most other package managers too.